Deuce Luggage Rack Installation
INSTALLATION 1. Remove seat according to the instructions in the service manual.
Remove the ECM caddy/battery cover by removing two screws. See Figure 1 and Figure 2 for the mounting locations of the brackets. NOTE Some seats may limit the fore/aft mounting location of the backrest bracket. See Figure 3 and Table 1. Remove plastic protective cap and locknut from stud. Leave the small plastic washer in place or the stud plate will fall out.
With the backrest mounting bracket tab facing forward, attach the backrest mounting bracket (1) to stud plate with stock locknuts from the stud plate. Tighten locknuts to 5-8 ft-lbs (6.8-10.8 Nm). Attach the front mounting bracket (6) to the frame cross- member using using two flange screws (8) and flange nuts (7). Tighten screws to 72 in-lbs (8.1 Nm). Attach the bracket support (2) to the front mounting bracket (6) with screw (8) and nut (7). Install screw (5) and nut (9) to bracket support and backrest tab and tighten to 15 ft-lbs (20.3 Nm). 1 2 is05475 1.
Backrest mounting bracket 2. Zte Blade Q Driver on this page. Front mounting bracket Figure 1. Bracket Mounting Locations 3 2 1 is05476 1. Casio Prayer Qibla Compass Manual here. Backrest mounting bracket 2.